Make an imagebuilding hub

Make an imagebuilding hub#

We can support users who want to build, push and launch user images, from open source GitHub repositories, similar with what mybinder.org does, but from within their JupyterHubs

We call this an imagebuilding style hub and the primary features offered would be:

User authentication
Persistent storage
Server options allowing:
- pre-defined list of images to choose from
- specifying another image, different from the ones in the pre-defined list
- building and pushing an image to a registry from a GitHub repository

Connect with `jupyterhub-fancy-profiles`#

Since jupyterhub-fancy-profiles adds on to the profileList feature of KubeSpawner, we need to configure a profile list here as well. Edit and update the following configuration per the community requesting the hub needs.

jupyterhub:
  singleuser:
    profileList:
      - display_name: Choose your environment and resources
        slug: only-choice
        profile_options:
          image:
            display_name: Image
            # Enables dynamic image building for this profile
            dynamic_image_building:
              enabled: True
            unlisted_choice:
              enabled: True
              display_name: "Custom image"
              validation_regex: "^.+:.+$"
              validation_message: "Must be a publicly available docker image, of form <image-name>:<tag>"
              display_name_in_choices: "Specify an existing docker image"
              description_in_choices: "Use a pre-existing docker image from a public docker registry (dockerhub, quay, etc)"
              kubespawner_override:
                image: "{value}"
            choices:
              pangeo:
                display_name: Pangeo Notebook Image
                description: "Python image with scientific, dask and geospatial tools"
                kubespawner_override:
                  image: pangeo/pangeo-notebook:2023.09.11
              scipy:
                display_name: Jupyter SciPy Notebook
                slug: scipy
                kubespawner_override:
                  image: quay.io/jupyter/scipy-notebook:2024-03-18

Note the dynamic_image_building.enabled property of the image option - that enables dynamic image building!

Setup the image registry#

For GCP (via terraform)#

If the hub will be deployed on a GCP cluster, we can setup gcr.io via the terraform config.

Enable the repository creation by adding the following in the cluster’s terraform config:
```
container_repos = [
  "some-other-repository",
  "<repository-name>",
]
```
where <repository-name> is the name of the repository where all the images built from the hub will be pushed.

Note

If a container_repos config already exists, then, just add the new repository name to this list.
Get the registry credentials

The username to access this registry is _json_key and the password can be discovered by running the following terraform command:
```
terraform output registry_sa_keys
```
Important

Store these somewhere safe as we will need them in a following step.

For other cloud providers (quay.io)#

If the hub will be deployed on another cloud provider than GCP, we must get the credentials of the robot account that will allow us to push and pull from the central quay organization ‘imagebuilding-non-gcp-hubs’. This organization stores the images used by 2i2c hubs running on infrastructure different than GCP.

Go to the ‘Robot Accounts’ tab of the ‘imagebuilding-non-gcp-hubs’ organization
Click on the ‘imagebuilding-non-gcp-hubs+image_builder’ name of the robot account. This will give you its username and password.

Important

Store these somewhere safe as we will need them in a following step.

Setup the `binderhub-service` chart#

We will use the binderhub-service helm chart to run BinderHub, the Python software, as a standalone service to build and push images with repo2docker, next to JupyterHub.

Note

We make use of YAML anchors and aliases to effectively repeat certain config values below.

Setup the binderhub-service config

Note

The binderhub-service.config.BinderHub.image_prefix setting has to respect a specific format, depending on the image registry used:

for gcr.io: <region>-docker.pkg.dev/<project-name>/<repository-name>
for quay.io: quay.io/imagebuilding-non-gcp-hubs/<cluster-name>-<hub-name>-

binderhub-service:
  enabled: true
  config:
    BinderHub:
      # see note above for the format of the image_prefix
      image_prefix: <path-to-image-registry>
    DockerRegistry:
      # registry server address like https://quay.io or https://us-central1-docker.pkg.dev
      url: &url <server_address>
      # robot account namer or "_json_key" if using grc.io
      username: &username <account_name>
  buildPodsRegistryCredentials:
    server: *url
    username: *username

Sops-encrypt and store the password for accessing the image registry, in the enc-<hub>.secret.values.yaml file, and any other credentials added there.

You should have the password for accessing the image registry from a previous step.
```
binderhub-service:
  config:
    DockerRegistry:
      password: &password <password>
  buildPodsRegistryCredentials:
    password: *password
```
If pushing to quay.io registry, also setup the credentials for image pulling

When pushing to the quay registry, the images are pushed as private by default (even if the plan doesn’t allow it).

A quick workaround for this, is to use the robot’s account credentials to also set imagePullSecret in the enc-<hub>.secret.values.yaml:
```
jupyterhub:
  imagePullSecret:
      create: true
      registry: quay.io
      username: <robot_account_name>
      password: <password>
```
Make sure to re-encrypt the file!

Note

imagePullSecret is not required for GCP deployments since k8s pods are setup with credentials automatically by GCP in the background.

If dask-gateway is enabled, the scheduler and worker pods needs to be configured to reference the k8s Secret created by the JupyterHub chart through the config above. This is done like below:
```
dask-gateway:
  gateway:
    backend:
      imagePullSecrets: [{name: image-pull-secret}]
```

Ensure the BinderHub components are scheduled on appropriately small nodes using node selectors

binderhub-service:
 dockerApi:
   nodeSelector:
     node.kubernetes.io/instance-type: <e.g. r5.xlarge>
 config:
   KubernetesBuildExecutor:
     node_selector:
       node.kubernetes.io/instance-type: <e.g. r5.xlarge>